3D Laser Scanning in Arizona

Know the Site Before You Design or Dig

Architects, contractors and building owners across Phoenix, Tucson, Flagstaff, Prescott, Yuma and communities across the state call Line & Circle when they cannot afford to guess at existing conditions. We scan whole buildings, historic structures and larger facilities with terrestrial LiDAR, then turn the data into models and drawings your team can build from.

Based in Gold Canyon, Arizona, we travel statewide, from Flagstaff to the border, and work with project teams nationwide. We focus on buildings, historic structures and larger facilities, not small or single-room scans.

Color laser scan point cloud of a historic stone chapel in Flagstaff
Color point cloud of a historic stone chapel in Flagstaff
Color laser scan point cloud of the Two Guns round house ruins
Color point cloud of the Two Guns round house ruins off I-40

What We Scan

Whole buildings

Inside and out, ahead of renovations, additions and adaptive reuse.

Historic structures

Landmarks that need accurate documentation before any work begins.

Commercial, medical and industrial

Facilities including plants and pump yards.

Existing structure and MEP

Structure, piping and equipment that new work must tie into with confidence.

Commercial and Industrial Buildings in Arizona

Most of our scanning is commercial work: occupied buildings that need accurate as-built drawings before a renovation, tenant improvement or addition. We capture the structure, ceilings, mechanical and electrical rooms, and the exterior in one visit, then deliver the Revit model and plan sheets your design team and contractor build from.

Renovations and tenant improvements

Existing conditions for office, retail and restaurant spaces, so new layouts are designed against what is actually there.

Medical and office buildings

Ceiling heights, plenum space and equipment locations captured without disrupting a working facility.

Industrial, utility and plant

Piping, equipment and structure recorded in 3D so new work ties in cleanly. See the water facility piping model.

Hospitality and multifamily

Hotels and residential buildings modeled for construction documents. See the Phoenix-area hotel.

Exterior laser scan of a commercial building in the East Valley used for reflected ceiling plans
Exterior scan of a commercial building captured for ceiling plans
Laser scan of an active utility construction site with new piping
Laser scan of an active utility construction site with new piping

How It Works

ScanTerrestrial LiDAR captures the site as a dense, measured point cloud, with minimal disruption to your operations.
VerifyThe scan data is registered and checked, so the model is built on measured conditions.
Model and deliverRevit models, plan sheets and point cloud files your team can use directly.

What You Receive

A coordinated Revit model, plan sheets and the point cloud behind them, organized so every trade works from the same picture. We deliver files your team can open and build from.

Why Arizona Teams Scan First

  • Designs are checked against measured conditions before work begins.
  • One coordinated record of existing and new work, so conflicts show up on screen, not in the field.
  • Anything on site can be measured later from the desk, without a return trip.
  • Every click costs money. Starting from measured conditions removes the ones spent on rework.

From Scan to Model

Color point cloud of the Audrey Headframe site in Jerome
Color point cloud of the Audrey Headframe site in Jerome
Laser scan data overlaid on the Revit model of a pump station
Scan data overlaid on the Revit model of a Phoenix-area pump station

See how this played out on real projects across the state.

Chandler Shell Space ScanCamelback Road Commercial Site Scan, PhoenixChapel of the Nativity, FlagstaffTwo Guns Round HouseAudrey Headframe, JeromeWater Facility Piping ModelPhoenix Area Hotel: Model to CD Set

Areas We Serve

Phoenix and the East Valley, Pinal County, Tucson and Southern Arizona, Flagstaff, Prescott, Jerome, Sedona, Yuma and rural sites statewide. Belize and other international work by arrangement.

Accuracy and Quality Control

LiDAR measures the site directly. Every scan setup is registered into one point cloud and checked before modeling begins, and we model to a tolerance of 1/8 inch. The point cloud stays with the deliverables, so any dimension can be verified against the measured data.

Historic Preservation Scanning in Arizona

From Flagstaff chapels to Jerome mine headframes and the ruins at Two Guns, we have documented Arizona landmarks in color point clouds and measured drawings that preserve the record for stabilization, restoration and interpretation. See our historic preservation work.

From Scan to BIM

The point cloud is the start, not the deliverable. We build coordinated Revit models from the scan data so design, documentation and coordination all work from measured conditions. See BIM and Scan-to-BIM services.

Arizona Laser Scanning FAQ

How accurate is 3D laser scanning?

LiDAR scanning measures the site directly, and we model to a tolerance of 1/8 inch, so your design starts from measured conditions instead of assumptions.

What size projects do you take?

We focus on buildings, historic structures and larger facilities. We do not take small or single-room scans.

Will scanning disrupt our site or operations?

Scanners are quiet and unobtrusive. We plan the work around your schedule, and we have scanned active sites with crews and equipment working nearby.

What do we receive?

Depending on scope: the point cloud, a coordinated Revit model and plan sheets, organized so every trade works from the same information.

Can you scan while construction is still under way?

Yes. We scanned a water facility with its tank only partly built, then modeled the existing conditions so the new piping could be designed against them.

Do you work in Arizona summer heat?

Yes. We plan scanning around site conditions, including early starts during the hottest months.

Where are you based, and who do you serve?

Line & Circle is based in Gold Canyon, Arizona. We serve all of Arizona and work with project teams across Arizona and nationwide.

How do we get started?

Tell us about your building or site and what you need to know before work begins. We will respond promptly with what we would scan and what you would get back.

Planning Work in Arizona?

Tell us about your site and what you need to know before work begins. We respond promptly. Call (480) 770-6336 or use the contact page.

Scroll to Top